HB6674Adhesion Promoter
32 oz (0.95 L)
CB+Plus™ Universal Adhesion Promoter in a 32 oz quart can. Single-component, ready-to-spray. 50-state regulations compliant.
Technical Specifications
| Part Number | HB6674 |
| Size | 32 oz (0.95 L) |
| Packaging | 6 Quarts / Case |
| UPC | 767787957834 |
| EAN | 767787957834 |
| Type | Single-component, ready-to-spray adhesion promoter |
| VOC Compliance | US National Rule & SCAQMD Rule 1151 compliant |
| Compatibility | Water & solvent base-coat systems |
| Dry time | Ready to paint in 3-10 minutes |
| Recommended surfaces | Bare plastic, old paint, metal (except HDPP) |
| Spray gun tip | 1.2 mm – 1.4 mm |
| Origin | Made in Japan |
Documentation & Ordering
DANGER! FLAMMABLE. HARMFUL OR FATAL IF SWALLOWED. VAPOR HARMFUL. SKIN AND EYE IRRITANT. CONTENTS UNDER PRESSURE. Read entire label prior to purchase, use or storage.
Directions for Use
THIS PRODUCT IS SINGLE-COMPONENT, READY TO SPRAY. Carefully read all instructions on the Technical Data Sheet and cautions on the SDS before use. Protect hands with solvent resistant gloves and eyes with chemical splash goggles.
- 1Tack dry surface thoroughly with a clean tack cloth.
- 2Shake well and filter before each use to secure uniform mixture.
- 3Recommended spray gun tip is 1.2mm – 1.4mm. Apply a medium closed coat to the surface, ensuring uniform coverage.
- 4Wait 25-30 minutes, or when tack free, before applying next coating. Dry times vary with temperature and humidity.
This product may not be compatible with all surfaces and all conditions surrounding application. Before applying to any surface, always test product in a small, inconspicuous area to ensure no damage will result. Recommended for all bare plastic, old paint and metal surfaces except HDPP, see TDS for more information.
